BetaFPV F4 2S FC/ESC AIO (No RX)

$34.99
Out of stock
SKU
betafpv-f4-2s-aio-no-rx

This AIO F4 FC is suitable for a lighter 2S whoop drone, like Beta65 Pro 2 or Beta75 Pro 2etc. It integrated a Betaflight F411 processor FC, Betaflight OSD, SPI Frsky receiver and 1-2S 5A ESC. So the 2S drone could save many weight for a faster fly experience.

SPECIFICATIONS OF FC

  • CPU: STM32F411CEU6 (100MHZ )
  • Six-Axis: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection)
  • Size: 26mm x 26mm, fully compatible with the all whoop drone mounting pattern, recommend the Beta65X frame and Beta75 Pro frame.
  • Firmware version: betaflight_matekf411rx_4.0.0 (Development Version)
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Built in SPI Frsky D16 protocol native receiver, compatible with almost ALL Frsky FCC radios(e.g. Taranis X9D/X9D Plus/X7) or Frsky compatible transmitter module. Not compatible with Frsky LBT protocol.
  • Power Cable: 55mm, with 2pcs JST-PH 2.0 connector, AKA PowerWhoop connector
  • Weight: 4.5g 

SPECIFICATIONS OF ESC

  • Built-in ESC with 5A continuous and peak 6A current
  • Power supply: 1-2S
  • Support BLHeliSuite programmable
  • Factory firmware: S_H_50_REV16_7.HEX
  • Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM

RECOMMENDED PARTS LIST

  • Frame:  Beta65X frame / Beta75 Pro 2 frame
  • Props: 31mm 4-Blades props (for Beta65 X frame) / 40mm 4-blades props (for Beta75 Pro 2 frame)
  • Motors: 0802 motors
  • Battery: 2pcs 300mAh 1S batteries

PACKAGE

  • 1 * F4 2S brushless flight controller
  • 4 * M1.2x4mm screws
  • 4 * M1.4x5mm screws
  • 4 * Anti-vibration ruber dampers
Write Your Own Review
You're reviewing:BetaFPV F4 2S FC/ESC AIO (No RX)