Pre-Order TinyLeader Brushless Whoop - PNP

Out of stock

Pre-Order ETA: Dec 15, 2018

Batch 1 Pre-Order Includes 1 Free GNB 2s 450mah Battery


Brand Name: FullSpeed
Item Name: TinyLeader Brushless Whoop
Weelbase: 75mm plastic + carbon frame (1mm)
Weight: 41g (without battery)
Flight controller: FSD408(F411 FC) built-in OSD
ESC: FSD408(1-3S ESC) BLHELI_S 4in1 ESC Dshot600
Motor: 1103 11000KV with connector
Propeller: 40mm 4-blades props, 1.5mm shaft hole
Camera: Caddx Micro F2 camera with angle adjustable(0°- 45°)
VTX: FSD TX600 Pit/25/100/200/400/600 switchable VTX(support IRC Tramp)

FullSpeed FSD408 (F411 FC) Flight controller
Size: 20mm x 20mm x 5mm
Mounting hole: 16mm x 16mm
MCU: STM32 F411
Built-in Betaflight OSD
BEC: 5V/1.5A

FullSpeed FSD408 (1-3S ESC)BLHELI_S 4in1 ESC
Size: 20mm x 25mm x 5mm
Mounting hole: 16mm x 16mm
Firmware: BLHELI_S
Input voltage: 1-3S
Continuous current: 8A
BEC Ouput: NO

FullSpeed FSD TX600 25mW-600mW VTX FPV Transmitter
Output power: PIT/25mW/100mW/200mW/400mW/600mW switchable
Control mode:BFOSD control(support IRC Tramp)/button
Video system: NTSC/PAL
Antenna: IPEX
BAT: 5V Recommended
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ
(TX600's factory set up is on lock mode(5733-5866MHZ unlock). Please follow your local laws and regulations
if you need to unlock the frequency.)
Size: 26*26mm(L*W),Hole:20*20mm
Weight: 2.3g

Package Include(BNF include receiver)
1 x TinyLeader frame kit
1 x FSD408 1-3S 8A Flight tower
4 x 1103-11000KV brushless motor with connector
2 x 40mm 4-blade propeller(CW)
2 x 40mm 4-blade propeller(CCW)
1 x Caddx Micro F2
1 x FSD TX600 25mW-600mW VTX FPV Transmitter
1 x GNB 2S 450mAh 80C/160C Lipo battery(only include during pre-order)

Package size: 20x14x8 cm

Write Your Own Review
You're reviewing:Pre-Order TinyLeader Brushless Whoop - PNP