Team GVD Thresher 5" Frame

$44.90
In stock
SKU
Team GVD Thresher 5" Frame
The Thresher frame was designed to be the perfect balance between light weight and durability. Utilizing 5mm thick carbon arms, a 3mm base plate and 2mm top plate, the frame weighs under 74 grams assembled with metal hardware.

Thresher 5" by Paul Park

The Thresher frame was designed to be the perfect balance between light weight and durability. Utilizing 5mm thick carbon arms, a 3mm base plate and 2mm top plate, the frame weighs under 74 grams assembled with metal hardware.

The top plate is specially designed to take the exclusive GVD Shark fin. This fin assists when needing to flip over while upside down. There is also a place for an SMA/RP-SMA antenna pigtail to be mounted on the fin. It will protect a stubby antenna placed on the fin from gate impacts.

Unlike some compact 5" frames there is plenty of room to use RaceWire so that prop strikes don't cut into motor wires.

There are also optional arm braces you can use to further increase stiffness and protect the fpv camera.

The frame can accept 2204-2207, 2306 or similarly sized motors.

Features:

  • 5mm chamfered arms
  • 3mm chamfered base plate (easy on your GVD velcro strap!)
  • 2mm top plate
  • exclusive GVD shark fin
  • 3 points of contact per arm for rigidity

Recommended build components:

  • 30A or better 4 in 1 ESC
  • f4 or better flight controller
  • micro camera (Runcam Micro/Foxeer Micro)
  • unify or akk vtx
  • RaceWire Mini
  • 2205 through 2306/2207 motors

This kit includes:

  • 1 - Top Plate
  • 1 - Bottom Plate
  • 4 - arms
  • 1 - front brace
  • 4 - standoffs
  • 4 - 8mm screws
  • 9 - 12mm screws
  • 8 - 14mm screws (4 for FC stack)
  • 4 - nylon hex spacers
  • 9 - m3 locknuts
  • 1 - Shark fin
  • 1 - set camera mounts
  • 1 - Team GVD Strap

Write Your Own Review
You're reviewing:Team GVD Thresher 5" Frame